BCM Outputs

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

Backup Lamps: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the backup lamps are turned ON.
Brake Applied Outputs: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the brake pedal is applied.
Instrumentation Backlight: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the instrument panel (I/P) lamps are commanded ON by the BCM.
Interior Lamp Output: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the interior lamps are turned ON.
LF Turn/DRL Lamp Status: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the left turn signal is turned ON or when the BCM turns ON the daytime running lamps (DRL).
LR Stop/Turn Signal Lamp: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the left turn signal is turned ON or when the brakes are applied.
Low Beam Relay Command: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the low beam headlamps are turned ON.
Park Lamp Relay: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the park lamps are turned ON.
RF Turn/DRL lamp Status: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the right turn signal is turned ON or when the BCM turns ON the DRL.
RR Stop/Turn Signal Lamp: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the right turn signal is turned ON or when the brakes are applied.