Scan Tool Output Controls
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
Body Control Module (BCM)
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Backup Lamps | Light Test | The body control module (BCM) activates the backup lamp relay when you select ON. The backup lamps illuminate until commanded OFF. |
| LF Turn Lamp/DRL | Light Test | The BCM activates the left front turn signal lamps when you select ON. The turn signal lamps illuminate until commanded OFF. |
| Parking Lamp | Light Test | The BCM activates the park lamp relay when you select ON. The park lamps illuminate until commanded OFF. |
| RF Turn Lamp/DRL | Light Test | The BCM activates the right front turn signal lamps when you select ON. The turn signal lamps illuminate until commanded OFF. |
| Interior Lamps | Light Test | The BCM activates the interior lamps outputs for 5 seconds when you select ON. The dome, footwell and courtesy lamps illuminate for 5 seconds. |
| High Beam Relay | Light Test | The BCM activates the high beam relay when you select ON. The high beam headlamps illuminate until commanded OFF. |
| Low Beam Relay | Light Test | The BCM activates the low beam relay when you select ON. The low beam headlamps illuminate until commanded OFF. |
| LR Stop/Turn Signal Lamp | Light Test | The BCM activates the left rear stop/turn signal lamp when you select ON. The lamp illuminates until commanded OFF. |
| RR Stop/Turn Signal Lamp | Light Test | The BCM activates the right rear stop/turn signal lamp when you select ON. The lamp illuminates until commanded OFF. |
| Instrumentation Backlight Dimming | Light Test | The BCM commands the IPC to dim the instruments from full dim to full bright. |