Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Roof Side Rail Lamp Components

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connectors to the roof side rail lamp.
Install the roof side rail lamp to the roof.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Fig 2: View Of Roof Side Rail Lamp

Courtesy of GENERAL MOTORS CORP.

Install the screws to the roof side rail lamp.
Tighten: Tighten the screws to 2 N.m (18 lb in).
Snap the coat hook access hole cover back into place on the roof side rail lamp.