LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> GTO Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Controls - Introduction) >> Repair Instructions >> Fuel Injector Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Fuel Injector
    GM896413Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the new fuel injector O-ring seals with clean engine oil and install on the fuel injector assembly.
  2. Install the clip onto the injector prior to installing the injector to fuel rail.
  3. Install the port fuel injector assembly into the fuel rail, with the fuel injector electrical connector facing upward.
    4. IMPORTANT: Press the injector into fuel rail until it clicks into the retainer clip.
  4. Install the fuel rail assembly. Refer to Fuel Rail Assembly Replacement .
scientia non olet · About LEMON Manuals