LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> GTO Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Computer/Integrating Systems) >> Repair Instructions >> Body Control Module (BCM) Programming/RPO Configuration >> BCM Setup
April 5, 2026: LEMON Manuals is launched! Read the announcement.

BCM Setup

WARNING: This page is about a different car, the 2005 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
  • After the procedure is completed, the personalization settings of the BCM are set to a default setting. Inform the customer that the personalization must be set again.
  • Always perform this procedure after BCM or SDM replacement.
  • A new BCM may set DTC B1001 00 before performing this procedure. This is a normal condition and DTCs will clear after the procedure is performed.

Follow the instructions on the scan tool under Vehicle Control Systems>Module Replacement/Setup Procedures>BCM>BCM Setup to perform this procedure.

During this procedure, besides RPO configuration, the BCM relearns the restraints ID.

scientia non olet · About LEMON Manuals