LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> GTO Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Computer/Integrating Systems) >> Repair Instructions >> Body Control Module (BCM) Programming/RPO Configuration >> BPP Sensor Calibration
April 5, 2026: LEMON Manuals is launched! Read the announcement.

BPP Sensor Calibration

WARNING: This page is about a different car, the 2005 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
  • Always perform this procedure after the BCM was reprogrammed or after the brake pedal position sensor was replaced.
  • Do not press the brake pedal during the programming procedure.
  • A current DTC C0278 set by BCM before performing this procedure is a normal condition. The DTC will clear after the procedure is performed.

Refer to Brake Pedal Position Sensor Calibration in Lighting Systems.

scientia non olet · About LEMON Manuals