LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Grand Prix Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.8L - Introduction >> Repair Instructions >> Air Cleaner Intake Duct Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying MAF/IAT Sensor
    GM1208107Courtesy of GENERAL MOTORS CORP.
  1. If removed, install the clamps to the air cleaner intake duct.
  2. Install the MAF/IAT sensor to the air cleaner intake duct.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the air cleaner intake duct to the throttle body and the air cleaner cover.

    Tighten:  Tighten the duct clamps to 3 N.m (27 lb in).

  4. Connect the PCV tube.
  5. Connect the MAF/IAT sensor electrical connector (2).
  6. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (L26) or Fuel Injector Sight Shield Replacement (L32) in Engine Mechanical - 3.8L.
scientia non olet · About LEMON Manuals