Removal Procedure
IMPORTANT:
Clean the fuel connections and surrounding areas prior to disconnecting the lines in order to avoid possible system contamination.
- Remove the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement .
- Remove the brake master cylinder and reposition. Refer to Master Cylinder Replacement .
- Relieve the fuel system. Refer to Fuel Pressure Relief Procedure .
- Disconnect the fuel feed line (1) from the fuel rail. Refer to Quick Connect Fitting(s) Service (Metal Collar) .
- Open the fuel/brake pipe retainers (1).
- Remove the fuel feed line from the fuel/brake pipe retainers (1).
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the fuel/brake line retainer bolt.
- Remove the fuel feed line from the retainer.
- Remove the fuel/brake line push in retainer from the underbody.
- Remove the fuel feed line from the retainer.
- Remove the fuel/brake line retainer bolts.
- Remove the fuel feed line from the retainer.
- Open the fuel/brake line retainer (1).
- Remove the fuel feed line from the retainer.
- Disconnect the fuel feed (3) and evaporative emission (EVAP) (4) lines from the fuel tank lines (1, 2). Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
- Remove the fuel feed line.