LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Grand Prix Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.8L - Introduction >> Repair Instructions >> Fuel Sender Assembly Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Position the NEW fuel sender assembly O-ring onto the fuel tank.
    2. Fig 1: Fuel Sender Assembly & Lock Ring
    GM1575962Courtesy of GENERAL MOTORS CORP.
  2. Install the fuel sender (2) into the fuel tank. Ensure that the tab is in the proper location.
  3. Push down the fuel sender and position the lock ring (1) onto the fuel tank.
    4. IMPORTANT: Do not all the tool to come in contact with the male pipe ends while locking the lock ring.
  4. Rotate the lock ring clockwise using the J 45722 until fully seated.
  5. Connect the fuel line to the sender. Refer to Quick Connect Fitting(s) Service (Metal Collar) .
  6. Connect the EVAP line to the sender. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  7. Install the fuel tank. Refer to Fuel Tank Replacement .
scientia non olet · About LEMON Manuals