Installation Procedure
- Install the CKP sensor.
- Install the CKP sensor bolt.
Tighten: Tighten the bolt to 25 N.m (18 lb ft).
- Connect the CKP sensor electrical connector (1).
- Install the right exhaust manifold. Refer to Exhaust Manifold Replacement - Right (RPOs L26/L32) or Exhaust Manifold Replacement - Right (RPO LS4) .
- Perform the CKP system variation learn procedure. Refer to CKP System Variation Learn Procedure .
NOTE:
Refer to Fastener Notice
in Cautions and Notices.