Installation Procedure
- Install the ECM to the air cleaner lower housing.
- Connect the ECM electrical connectors (2).
- Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
- Install the left front inner fender brace. Refer to Brace Replacement - Front Fender Upper Diagonal .
- Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure (RPOs L26/L32) or Battery Negative Cable Disconnect/Connect Procedure (RPO LS4) .
- Program the new ECM. Refer to Engine Control Module Programming and Setup .
Fig 2: Transmission Control Module, Engine Control Module & A/C Pressure Sensor Electrical Connectors