LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Grand Prix GXP >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 5.3L - Introduction >> Repair Instructions >> Fuel Sender Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Fuel Sender Assembly & Lock Ring
    GM1575962Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
  2. Disconnect the evaporative emission (EVAP) lines from the sender. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  3. Disconnect the fuel line from the sender. Refer to Quick Connect Fitting(s) Service (Metal Collar) .
  4. Reposition the fuel feed and EVAP lines in order to access the lock ring.
    5. IMPORTANT: Do not allow the tool to come in contact with the male pipe ends while unlocking the lock ring.
  5. Rotate the lock ring (1) counterclockwise using the J 45722 .
  6. Remove the fuel sender (2) from the fuel tank.
  7. Remove and discard the fuel sender O-ring seal.
  8. Clean and inspect the fuel sender assembly O-ring seal sealing surfaces.
scientia non olet · About LEMON Manuals