LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Grand Prix GXP >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 5.3L - Introduction >> Repair Instructions >> Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of MAF/IAT Sensor
    GM1556017Courtesy of GENERAL MOTORS CORP.
  1. Install the MAF/IAT sensor seal, if necessary.
  2. Install the MAF/IAT sensor to the air cleaner housing.
  3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the MAF/IAT sensor bolts.

    Tighten:  Tighten the bolts to 10 N.m (89 lb in).

  5. Fig 2: Identifying MAF/IAT Sensor
    GM1208107Courtesy of GENERAL MOTORS CORP.
  6. Connect the MAF/IAT sensor electrical connector (2).
  7. Install the air intake duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .