LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Sunfire Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.2L - Introduction >> Repair Instructions >> Accelerator Controls Cable Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Identifying Accelerator Control Cable
    GM14159Courtesy of GENERAL MOTORS CORP.
  1. Depress the accelerator control cable tangs (1) from the pedal lever assembly.
  2. Remove the accelerator control cable from the pedal lever assembly.
    3. Fig 2: Identifying Cruise Control Cable
    GM782238Courtesy of GENERAL MOTORS CORP.
  3. Remove the cruise control cable (1), if applicable.
    4. Fig 3: Control Cable Bracket View
    GM782246Courtesy of GENERAL MOTORS CORP.
  4. Release the accelerator control cable lug (3) from the throttle body assembly (4).
  5. Depress the tangs on the control cable (2) while pulling the cable through the control cable bracket (1).
  6. Remove the control cable from the bracket.
    7. Fig 4: View Of Control Cable & Support Clip
    GM782235Courtesy of GENERAL MOTORS CORP.
  7. Disconnect the control cable (2) from the support clip (1).
  8. Remove the cable from the vehicle.
scientia non olet · About LEMON Manuals