Removal Procedure
- Remove the fuel rail. Refer to Fuel Rail Assembly Replacement .
- Remove the fuel injector electrical connector.
- Remove the fuel injector retainer clip (1).
- Remove the fuel injector from the fuel rail.
- Remove and discard the fuel injector O-rings.
IMPORTANT:
Visually inspect the fuel injector in order to determine if the upper O-ring was also removed. If the upper O-ring in not removed, remove the O-ring from the fuel rail assembly.
IMPORTANT:
If the fuel injector insulator cups are removed from the cylinder head while removing the fuel rail, new insulator cups must be installed.