LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Sunfire Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.2L - Introduction >> Repair Instructions >> Throttle Position (TP) Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. With the throttle in the closed position, install the TP sensor and seal.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
    IMPORTANT: Install a new TP sensor screw when replacing the TP sensor.
  3. Install the TP sensor screw.

    Tighten:  Tighten the TP sensor screw to 2 N.m (18 lb in).

  4. Fig 1: View Of Idle Air Control (IAC) Valve & Throttle Position (TP) Sensor
    GM783168Courtesy of GENERAL MOTORS CORP.
  5. Connect the TP sensor harness connector (2).
  6. Install the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement .