Removal & Installation

WARNING: This page is about the G6 Base, 2.4 B, which is a different variant/trim than selected.

TRANS ID - 440T4, 4T60, 4T60E, 4T65E

Applies To	Note	Standard Hours	Skill Level
	DOES NOT include wheel alignment.	6.1	C
Combination Procedure: CONVERTER: Drain & Test:
		0.2	C
Combination Procedure: CONVERTER BUSHING & SEAL: Remove & Replace:
		0.3	B
Combination Procedure: CONVERTER SEAL: Remove & Replace:
		0.2	B
Combination Procedure: FLYWHEEL: Remove & Replace:
		0.2	C
Combination Procedure: TORQUE CONVERTER: Remove & Replace:
		0.1	C
Combination Procedure: TRANSAXLE ASSEMBLY: Replace:
		1.0	C

Applies To	Note	Standard Hours	Skill Level
	DOES NOT include wheel alignment.	5.6	C
Combination Procedure: CONVERTER: Drain & Test:
		0.2	C
Combination Procedure: CONVERTER SEAL: Remove & Replace:
		0.2	B
Combination Procedure: FLYWHEEL: Remove & Replace:
		0.2	C
Combination Procedure: TORQUE CONVERTER: Remove & Replace:
		0.1	C
Combination Procedure: TRANSAXLE ASSEMBLY: Replace:
		1.0	C