Data Display/Definitions

The Scan Tool Data Display/Definitions contains a brief description of all the ABS/TCS data parameters. The menus available depend on the number and type of system on the vehicle and are listed below in alphanumeric order.

ABS DATA
TCS DATA
NORMAL MODE
SYSTEM CONFIGURATION

ABS Failed: The scan tool will display Yes/No. This will indicate if the ABS has failed.
ABS Pump Motor: The scan tool displays On or Off - This parameter indicates the state of the ABS pump motor.
ABS Warning Lamp: The scan tool will display On or Off depending on the state of the ABS indicator.
Brake Light Switch: The scan tool displays Applied or Released - The scan tool displays the state of the brake light switch.
Brake Switch: The scan tool displays Applied or Released - The scan tool displays the state of the brake switch.
Delivered Torque: The scan tool displays in N-m the amount of torque delivered.
DRP Disabled: The scan tool will display Yes/No. This will indicate if the DRP has been disabled.
Eng. Torque Request: The scan tool displays in N-m the requested engine torque.
Left Front Wheel Speed: The scan tool displays 0-255 km/h or (0-158 mph). The scan tool displays the actual speed of the left front wheel.
Left Rear Wheel Speed: The scan tool displays 0-255 km/h or (0-158 mph). The scan tool displays the actual speed of the left rear wheel.
LF Inlet Valve Solenoid: The scan tool will display Active or Inactive. The scan tool displays the commanded state of the LF inlet valve solenoid.
LF Outlet Valve Solenoid: The scan tool will display Active or Inactive. The scan tool displays the commanded state of the LF outlet valve solenoid.
Low TRAC: TCS Active: The scan tool displays Off or On. The scan tool displays On if the TCS indicator is currently being commanded ON.
LR Inlet Valve Solenoid: The scan tool displays Active or Inactive. The scan tool displays the commanded state of the LR inlet valve solenoid.
LR Outlet Valve Solenoid: The scan tool displays Active or Inactive. The scan tool displays the commanded state of the LR outlet valve solenoid.
Rear TCS Isolation Solenoid: The scan tool displays Active or Inactive. The scan tool displays the commanded state of the rear TCS isolation valve solenoid.
Rear TCS Prime Solenoid: The scan tool displays Active or Inactive. The scan tool displays the commanded state of the rear TCS prime valve solenoid.
Requested Torque: The scan tool displays in N-m the requested torque.
RF Inlet Valve Solenoid: The scan tool displays Active or Inactive. The scan tool displays the commanded state of the RF inlet valve solenoid.
RF Outlet Valve Solenoid: The scan tool displays Active or Inactive. The scan tool displays the commanded state of the RF outlet valve solenoid.
Right Front Wheel Speed: The scan tool displays 0-255 km/h or (0-158 mph). The scan tool displays the actual speed of the right front wheel.
Right Rear Wheel Speed: The scan tool displays 0-255 km/h or 0-158 mph - The scan tool displays the actual speed of the rear wheels.
RR Inlet Valve Solenoid: The scan tool displays Active or Inactive. The scan tool displays the commanded state of the RF inlet valve solenoid.
RR Outlet Valve Solenoid: The scan tool displays Active or Inactive. The scan tool displays the commanded state of the RF outlet valve solenoid.
TCS Failed: The scan tool will display Yes/No. This will indicate if the TCS has failed.
TCS Switch State: The scan tool displays Pressed/Released. The scan tool will display the state of the Traction Control Switch.
TCS Warning Lamp: The scan tool will display On or Off depending on the state of the TCS indicator.
Traction Control Equipped: The scan tool will display Yes/No. This will indicate if the vehicle is equipped with TCS.
Valve Relay State: The scan tool displays On or Off - This parameter indicates the state of the valve relay.
VSES Equipped: The scan tool will display Yes/No. This will indicate if the vehicle is equipped with VSES.