LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2006 >> GTO Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Lock Control System >> Diagnostic Information and Procedures >> Scan Tool Data List
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Scan Tool Data List

The Shift lock Control Scan Tool Data List contains all shift lock control related parameters that are available on the scan tool. The list is arranged in alphabetical order. A given parameter may appear in any one of the data lists, and in some cases may appear more than once, or in more than one data list in order to group certain related parameters together.

Use the Shift Lock Control Scan Tool Data List only after the following is determined:

Scan tool values from a properly functioning system may be used for comparison with the system you are diagnosing. The Shift Lock Control Scan Tool Data List represents values that would be seen on a normal functioning system engine.

IMPORTANT: A scan tool that displays faulty data should not be used. The scan tool problem should be reported to the manufacturer. Use of a faulty scan tool can result in misdiagnosis and unnecessary parts replacement.

Only the parameters listed below are referenced in this service manual for use in diagnosis. If all values are within the typical range described below, refer to Symptoms - Automatic Transmission Shift Lock Control  for diagnosis.

The column labeled Data List indicates where a parameter can be located on the scan tool. Refer to the scan tool operating manual for the exact locations of the data lists. The following is a description of each term listed:

Cruise/Traction

Cruise/Traction Data List

Eng

Engine Data List

Electrical/Theft

Electrical/Theft Data List

IPC

IPC Data List

MT

Manual Transmission Data List

TAC

Throttle Actuator Control (TAC) Data List

Scan Tool Data List

Scan Tool Parameter Data List Parameter Range/Units Typical Data Values
Engine Idling/Radiator Hose Hot/Closed Throttle/Park or Neutral/Closed Loop/Accessories Off
BPP Signal Electrical/Theft, Cruise/Traction, Eng, TAC Applied/Released/Invalid Released
BPP Circuit Signal Electrical/Theft, TAC Applied/Released Released
Current Gear IPC Transmission Gear Position 1,2,3,4,5,6
Ext Travel BPP Signal TAC Applied/Released/Invalid Released
PNP Switch (If Equipped) Electrical/Theft Park, Reverse, Neutral, Drive, 4, 3, 2, 1 Park
TCC/Cruise Brake Pedal Switch MT, TAC Applied/Released Release
TR Sw Eng Transmission Gear Position Varies