Next Available Slot
Incremental programming allows for a transmitter to be reprogrammed into the next available location without affecting the currently programmed transmitters. Previously programmed transmitters will not be erased during this procedure.
IMPORTANT:
If all 4 slots are programmed, the Invalidate All procedure will need to be performed to allow transmitter programming.
- Install a scan tool.
- Turn ON the ignition with the engine OFF.
- With the scan tool, select Body and Accessories.
- Select Keyless Entry.
- Select Module Setup.
- Select BCM.
- Select Program Key Fobs.
- Select Next Available Slot.
- Follow the scan tool on screen instructions.
- Remove the scan tool.
- Exit the vehicle. Operate all functions on transmitters to verify correct system operation.