LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2006 >> Torrent AWD >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Gear Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the front tires. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
    3. Fig 1: View Of Tie Rod End To Steering Knuckle
    GM854972Courtesy of GENERAL MOTORS CORP.
  3. Remove both outer tie rod to steering knuckle nuts. Discard the nuts.
    4. Fig 2: Separating Outer Tie Rod End From Steering Knuckle
    GM854983Courtesy of GENERAL MOTORS CORP.
    NOTE: Do not free the ball stud by using a pickle fork or a wedge-type tool. Damage to the seal or bushing may result.
    IMPORTANT: Hold the ball stud to prevent turning during removal of the nut.
  4. Using the J 24319-B  , separate the tie rods from the steering knuckles.
    5. Fig 3: Removing/Installing Steering Shaft To Intermediate Shaft
    GM927947Courtesy of GENERAL MOTORS CORP.
  5. Rotate the intermediate steering shaft in order to gain access to the intermediate shaft pinch bolt.
  6. Remove the intermediate to steering gear pinch bolt. Discard the bolt.
  7. Disconnect the intermediate shaft from the steering gear.
    8. Fig 4: View Of Stabilizer Shaft & Link
    GM927949Courtesy of GENERAL MOTORS CORP.
  8. Disconnect the stabilizer links from the stabilizer bar. Refer to Stabilizer Shaft Link Replacement in Front Suspension.
    9. Fig 5: View Of Steering Gear & Steering Gear-To-Frame Bolts
    GM927957Courtesy of GENERAL MOTORS CORP.
  9. Remove the steering gear to cradle mounting bolts.
  10. Remove the steering gear through the right side of the vehicle.
  11. With heat shield equipped steering gears, remove the heat shield. Save for installation.
scientia non olet · About LEMON Manuals