Engine Control Module (ECM) /Powertrain Control Module (PCM)
- BPP Circuit Signal
-
Display Applied or Released status of the brake pedal position signal.
- Ignition 1 Signal
-
Display indicates ON when the ignition 1 input circuit of the module receives a battery signal from the ignition switch.
- Stoplamp Pedal Switch
-
Display Applied or Released status of the stoplamp pedal switch.
- TCC Brake Switch
-
Displays ON or OFF status of the TCC Brake switch.
- TR Sw.
-
Displays Park, Reverse, Neutral, Drive 5, Drive 4, Drive 3, Drive 2 or Drive 1.