Removal & Installation
TRANS ID - 440T4, 4T60, 4T60E, 4T65E
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| DOES NOT include wheel alignment. | 6.1 | C | ||
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| 0.2 | C | |||
| Combination Procedure: CONVERTER BUSHING & SEAL: Remove & Replace: | ||||
| 0.3 | B | |||
| Combination Procedure: CONVERTER SEAL: Remove & Replace: | ||||
| 0.2 | B | |||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: | ||||
| 1.0 | C | |||
TRANS ID - 4T40E, 4T45E
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| DOES NOT include wheel alignment. | 5.9 | C | ||
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| 0.2 | C | |||
| Combination Procedure: CONVERTER SEAL: Remove & Replace: | ||||
| 0.2 | B | |||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: | ||||
| 1.0 | C | |||
TRANS ID - 6T40, 6T70
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Includes: Confirm Fluid temperature for level check. | 7.7 | C | ||
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| 0.2 | C | |||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: | ||||
| Includes: Programming. | 0.8 | C | ||