Transaxle Assembly: Remove & Replace
WARNING: This page is about the G6 Base, 2.4 B, which is a different variant/trim than selected.
TRANS ID - 440T4, 4T60, 4T60E, 4T65E
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| Refer to Transaxle Assembly - R&I plus Combinations. | | | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | | C |
TRANS ID - 4T40E, 4T45E
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| DOES NOT include wheel alignment. | 6.9 | | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.2 | | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
TRANS ID - 6T40, 6T70
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| Includes: Programming.
Includes: Confirm Fluid temperature for level check. | 8.5 | | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | | C |