Installation Procedure
WARNING: This page is about a different car, the 2007 Buick LaCrosse and 2007 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the electrical connector to the receiver.
- Install the receiver by positioning the inboard retainer to the slot in the rear window shelf trim panel. Press the outboard retainers into the rear window shelf trim panel openings.
- Install the rear window shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement in Interior Trim.
- If a new remote control door lock receiver is being installed, program the transmitters. Refer to Control Module References for programming and setup information.