Installation Procedure

Fig 1: View Of Seat Belt Retractor At Lower Center Pillar

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the seat belt retractor side belt bolt.
Tighten: Tighten the bolt to 45 N.m (33 lb ft).

Fig 2: Locating Intermediate Guide Bolts

Courtesy of GENERAL MOTORS CORP.

Install the intermediate guide bolts.
Tighten: Tighten the bolts to 10 N.m (89 lb in).

Fig 3: Identifying Seat Belt Anchor Plate Nut

Courtesy of GENERAL MOTORS CORP.

Position the anchor plate to the seat stud.
Install the anchor plate nut to the seat stud.
Tighten: Tighten the nut to 42 N.m (31 lb ft).
Install the lower center pillar panel trim. Refer to Center Pillar Lower Trim Panel Replacement .
Install the upper center pillar panel trim. Refer to Center Pillar Upper Trim Panel Replacement .

Fig 4: Seat Belt Guide Loop Attachment Bolt

Courtesy of GENERAL MOTORS CORP.

Position the seat belt guide loop to the guide adjuster bracket.
Install the guide loop bolt (1).
Tighten: Tighten the bolt to 42 N.m (31 lb ft).
Close the seat belt guide loop cover.