Brake Pressure Modulator Valve Bracket Replacement

Fig 1: View Of rake Pressure Modulator Valve Bracket

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Place the ignition switch in the OFF position.
1	Brake Modulator Assembly Bracket Bolt NOTE: Refer to Fastener Notice . Tighten: 20 N.m (15 lb ft)
2	Brake Modulator Assembly Bracket Nut (Qty: 2) Tighten: 10 N.m (89 lb in)
3	Brake Modulator Assembly Bracket Tip: Without disconnecting the brake pipe fittings, carefully remove and support the brake modulator assembly.