Circuit Testing

Circuit Testing

The Circuit Testing section contains the following diagnostic testing information. Using this information along with the diagnostic procedures will identify the cause of the electrical malfunction.

* Using Connector Test Adapters
* Probing Electrical Connectors
* Troubleshooting with a Digital Multimeter
* Troubleshooting with a Test Lamp
* Using Fused Jumper Wires
* Measuring Voltage
* Measuring Voltage Drop
* Measuring Frequency
* Testing for Continuity
* Testing for Short to Ground
* Testing for a Short to Voltage
* Testing for Intermittent Conditions and Poor Connections
* Inducing Intermittent Fault Conditions
* Testing for Electrical Intermittents
* Scan Tool Snapshot Procedure
* Circuit Protection - Fuses
* Circuit Protection - Circuit Breakers
* Circuit Protection - Fusible Links