Installation Procedure

Fig 1: View Of Child Seat Anchor Assembly

Courtesy of GENERAL MOTORS CORP.

Install the child seat anchor assembly to the rear window shelf.

Fig 2: Identifying Child Seat Anchor Assembly To Body Retaining Bolt

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Component Fastener Tightening Notice .

IMPORTANT: Ensure child restraint assembly is installed as per illustration, failure to adhere to this installation will result in incorrect operation of the child restraint assembly.

IMPORTANT: Ensure that the anchor fitting is parallel to the vehicle centerline.

Install the child seat anchor assembly to body retaining bolt (2).
Tighten: Tighten the bolt to 20 N.m (22 lb ft).
Close the child seat anchor assembly cap (1).