Circuit/System Verification
- Verify that the transmitter is the correct transmitter for the vehicle.
- If not the correct transmitter, replace the transmitter.
- Place the transmitter on the test pad of the J 43241
and press each button of the transmitter one at a time. See Special Tools . The tester should sound a tone and illuminate a green light when each button is pressed.
- If one or more buttons does not sound the tone and illuminate the green light, replace the transmitter battery and retest with the J 43241
. See Special Tools . If the condition continues after battery replacement, replace the transmitter.
- Operate the transmitter while observing the scan tool Fob Function parameter for the applicable transmitter. The parameter should correspond with the function selected on the transmitter.
- If the parameter does not match the function selected on the transmitter, program the transmitter and retest. Refer to Transmitter Programming . If the condition continues after transmitter programming, replace the transmitter.
- If all circuits test normal, replace the RCDLR.