Side Object Sensor Replacement

WARNING: This page is about a different car, the 2008 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Side Object Sensor Module & Bolt

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the bumper fascia. Refer to Rear Bumper Fascia Replacement .
1	Side Object Sensor Module Bolt NOTE: Refer to Fastener Notice . Tip: Disconnect the electrical connectors. Tighten: 9 N.m 80 lb in
2	Side Object Sensor Module