Oil Pressure Sensor: Service and Repair

Engine Oil Pressure Sensor and/or Switch Replacement

Removal Procedure





1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair) .
2. Disconnect the engine oil pressure sensor electrical connector (2).




3. Remove the engine oil pressure sensor.



Installation Procedure






Notice: Refer to Fastener Notice (Fastener Notice) .

1. Install the engine oil pressure sensor.

Tighten the sensor to 22 N.m (16 lb ft).





2. Connect the engine oil pressure sensor electrical connector (2).
3. Lower the vehicle.