Rear Toe Adjustment

Fig 1: Locating Toe Link-To-Frame Fastener

Courtesy of GENERAL MOTORS CORP.

Loosen the suspension adjustment link-to-frame fastener enough to allow for movement.

IMPORTANT: The frame of the vehicle is slotted, a cam nut is available for service if required.

Rotate the suspension adjustment link cam nut in the direction necessary to correct the toe angle.
Snug the suspension adjustment link-to-frame fastener, do not tighten at this time.
Reinspect the rear toe specifications and adjust as necessary.

NOTE: Refer to Fastener Notice .

Hold the nut and tighten the link-to-frame fastener bolt.
Tighten: Tighten the bolt to 110 N.m (81 lb ft).
Repeat the procedure for the other rear wheel.