LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2009 >> G8 Base >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Fuel Tank Heat Shield Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying Fuel Tank Heat Shield To Fuel Tank Retaining Nuts
    GM1947049Courtesy of GENERAL MOTORS CORP.
  1. Position the fuel tank heat shield (2) to the vehicle.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the fuel tank heat shield to fuel tank retaining nuts (1) and tighten to 4 N.m (35 lb in).
  3. Lower the vehicle to the ground.
scientia non olet · About LEMON Manuals