LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2009 >> G8 Base >> Repair and Diagnosis >> Engine Performance >> System >> Data Communication System >> Repair Instructions >> Body Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying BCM Upper & Lower Retaining Clips
    GM1955549Courtesy of GENERAL MOTORS CORP.
    NOTE: Locate the upper retaining clip (2) and engage the lower retaining clips (1).
  1. Install the BCM (3).
    2. Fig 2: Identifying BCM Electrical Connectors
    GM1955548Courtesy of GENERAL MOTORS CORP.
  2. Connect the body control module (BCM) electrical connectors (1) to the BCM (2).
  3. Install the instrument panel retainer. Refer to Instrument Panel Retainer Replacement .
  4. Install the knee bolster. Refer to Knee Bolster Replacement .
  5. Install the left closeout insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
    6. WARNING: Refer to SIR Warning .
  6. Enable the SIR system. Refer to SIR Disabling and Enabling .
  7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals