Removal Procedure
- Ignition OFF.
- Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
- Remove the fuel tank assembly. Refer to Fuel Tank Replacement .
- Remove the primary fuel tank module assembly from the fuel tank. Refer to Primary Fuel Tank Module Replacement .
- Remove the fuel level sensor from the primary fuel tank module assembly. Refer to Fuel Level Sensor Replacement .
- Remove the fuel filter from the fuel pump housing. Refer to Fuel Filter Replacement .
- Disconnect the fuel pump connector (1) from the fuel pump (4).
- Using a suitable tool pull at the fuel pump extension (5) to remove the fuel pump (4) from the fuel pump housing (2).
- Remove the fuel pump (4) from the fuel pump housing (2).
- Remove and discard the fuel pump seal (3).
WARNING:
Refer to Battery Disconnect Warning
in Cautions and Notices.
WARNING:
To avoid any vehicle damage, serious personal injury or death, always use the jackstands to support the vehicle when lifting the vehicle with a jack.
WARNING:
Refer to Gasoline/Gasoline Vapors Warning
Gasoline/Gasoline Vapors Warning.
WARNING:
Refer to Safety Glasses Warning
Safety Glasses Warning.
NOTE:
Do not push the fuel pump (4) out of the fuel pump housing (2) at the fuel pump electrical connector (6).