LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2009 >> G8 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 3.6L - Introduction >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
    2. Fig 1: View Of Fuel Tank Pressure Sensor Electrical Connector
    GM802790Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector from the fuel tank pressure sensor.
  3. Open the retaining strap.
  4. Carefully pry the locking tabs away from the pressure sensor.
  5. Pull upward in order to remove the pressure sensor from the fuel tank.
scientia non olet · About LEMON Manuals