Circuit/System Verification (Object Alarm Module)

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Verify that DTC B1015 is not set.

IMPORTANT: When programming the VDAAW, use a Tech 2 and Candi module. Using the MDI to program the VDAAW will result in a failure to complete the programming operation.

If the DTC is set, program the object alarm module. Refer to Object Alarm Module Programming and Setup . If the DTC resets, replace the object alarm module.