Removal & Installation
WARNING: This page is about the G8 Base, which is a different variant/trim than selected.
TRANS ID - 5L40E
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| | 6.2 | | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| | 0.6 | | C |
TRANS ID - 6L80E
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| | 6.0 | | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.2 | | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.3 | | C |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANS OIL PUMP SEAL: Remove & Replace: |
| | 0.2 | | B |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| | 0.8 | | C |
| Combination Procedure: TRANSMISSION OIL PUMP: Remove & Replace: |
| | 1.6 | | B |