Installation Procedure
- Install the EGR pipe to exhaust manifold gasket.
- Install the EGR pipe (4).
- Install the 2 bolts (5) that secure the EGR pipe (4) to exhaust manifold.
Tighten: Tighten the bolts to 10 N.m (89 lb in).
- Install the bolt (3) the secures the EGR pipe (4) bolt to the EGR valve (1).
Tighten: Tighten the bolt to 30 N.m (22 lb ft).
- Install the injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
CAUTION:
Refer to Fastener Caution
.