LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2009 >> Torrent Base, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.4L - Introduction >> Repair Instructions >> Ignition Coil/Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Ignition Coil/Control Module
    GM1422425Courtesy of GENERAL MOTORS CORP.
  1. Install the ignition coil/control module to the ignition control module bracket.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the 4 bolts securing the ignition coil/control module to the ignition control module bracket.

    Tighten:  Tighten the bolts to 4.5 N.m (40 lb in).

  3. Connect the ignition coil/control module electrical connectors.
  4. Connect the spark plug wires.
  5. Install the injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
  6. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals