Removal Procedure

Fig 1: Depressing Button On Seat Buckle Quick Disconnect Using Flat-Bladed Tool

Courtesy of GENERAL MOTORS CORP.

Using a small flat-bladed tool, depress the button on the seat buckle quick disconnect feature while pulling up on the shoulder belt to disengage the shoulder belt from the front seat assembly.
Remove the lower garnish molding from the center pillar. Refer to Center Pillar Lower Garnish Molding Replacement .

Fig 2: View Of Retractor & Fastener - Front Seat

Courtesy of GENERAL MOTORS CORP.

Remove the retractor fastener and remove the retractor.
Remove the shoulder belt webbing retainer by pulling on the retainer while using a flat-bladed tool to disengage the attaching clips.
Remove the shoulder belt from the vehicle.