LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2009 >> Torrent Base, AWD >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Position the power steering pump to the vehicle through the right wheelhouse area.
    2. Fig 1: Identifying Power Steering Pump Bolts
    GM1818216Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  2. Install the power steering pump bolts (1) and tighten to 50 N.m (37 lb ft).
    3. Fig 2: Identifying Power Steering Gear Inlet Hose
    GM1818210Courtesy of GENERAL MOTORS CORP.
  3. Connect the power steering gear inlet hose (1) to the power steering pump.

    Tighten the fitting to 25 N.m (18 lb ft).

    4. Fig 3: Identifying Power Steering Reservoir Outlet Hose & Clamp
    GM1818200Courtesy of GENERAL MOTORS CORP.
  4. Compress the power steering reservoir outlet hose clamp (1) and connect the power steering reservoir outlet hose (2) to the power steering pump.
  5. Clean any excess power steering fluid from the vehicle and remove the drain pans.
  6. Install the drive belt. Refer to Drive Belt Replacement .
  7. Fill and bleed the power steering system. Refer to Power Steering System Bleeding .
scientia non olet · About LEMON Manuals