LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2009 >> Torrent Base, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.4L - Introduction >> Repair Instructions >> Spark Plug Wire Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
    2. Fig 1: View Of Left Side Spark Plug Wires & Retainers
    GM1087865Courtesy of GENERAL MOTORS CORP.
    CAUTION: Twist the spark plug boot one-half turn in order to release the boot. Pull on the spark plug boot only. Do not pull on the spark plug wire or the wire could be damaged.
  2. Remove the spark plug wires (1) from the left side spark plugs.
  3. Remove the spark plug wires from the retaining clips (2).
    4. Fig 2: View Of Spark Plug Wires (Right Side)
    GM1087939Courtesy of GENERAL MOTORS CORP.
  4. Remove the spark plug wires (1) from the right side spark plugs.
  5. Remove the spark plug wires from the retaining clips (2).
  6. Remove the spark plug wires from the ignition coil/control module.
  7. Remove the spark plug wires from the engine.
  8. If you are replacing the spark plug wires, transfer any of the following components:
    • Boot heat shields
    • Spark plug wire conduit
    • Spark plug wire retaining clips
scientia non olet · About LEMON Manuals