Removal & Installation
WARNING: This page is about the 911 E, Eng CD 2, Automatic Trans, which is a different variant/trim than selected.
TRANS ID - SPORTOMATIC SEMI-AUTOMATIC
Includes: R&I Engine and Transaxle Assembly.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 5.4 | C | |||
| Combination Procedure: CLUTCH LEVER SHAFT: Remove & Replace: | ||||
| 0.5 | A | |||
| Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace: | ||||
| 0.5 | C | |||
| Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace: | ||||
| 0.3 | C | |||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.8 | C | |||
| Combination Procedure: INTERMEDIATE LEVER: Remove & Replace: | ||||
| 0.3 | B | |||
| Combination Procedure: INTERMEDIATE LEVER BUSHING: Remove & Replace: | ||||
| 0.3 | B | |||
| Combination Procedure: PULL ROD: Remove & Replace: | ||||
| 0.3 | A | |||
| Combination Procedure: SERVO MOTOR: Removal & Installation: | ||||
| 0.3 | A | |||
| Combination Procedure: THROWOUT LEVER: Remove & Replace: | ||||
| 0.7 | 0.5 | B | ||
| Combination Procedure: THRUST ROD: Remove & Replace: | ||||
| 0.2 | B | |||
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: | ||||
| 0.6 | C | |||