Removal & Installation
WARNING: This page is about the 928 Automatic Trans, which is a different variant/trim than selected.
Includes: R&I Engine Assembly (where necessary).| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 8.7 | C | |||
| Combination Procedure: PINION SHAFT SEAL: Remove & Replace: | ||||
| Front | 0.8 | B | ||
| Rear | 0.5 | B | ||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.8 | C | |||
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: | ||||
| 1.0 | C | |||