Removal & Installation

Includes: R&I Engine Assembly (where necessary).

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
		5.1		C
Additional Procedure: TRANSAXLE ASSEMBLY: Removal & Installation:
Where Air Cond interferes add		0.4		C
Combination Procedure: CARRIER HOUSING: Remove & Replace:
		2.0		B
Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace:
		0.8		C
Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace:
		0.8		C
Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace:
Flywheel,Rear		1.3		B
Combination Procedure: FLYWHEEL: Remove & Replace:
		1.1		C
Combination Procedure: MAINSHAFT OIL SEAL: Remove & Replace:
		0.5		B
Combination Procedure: SHIFT HOUSING: Remove & Replace:
		1.1		B
Combination Procedure: TRANSAXLE ASSEMBLY: Replace:
		0.8		C
Combination Procedure: TRANSMISSION HOUSING: Replace:
RWD		2.8		A