LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Porsche >> 1985 >> 944 Automatic >> Repair and Diagnosis >> Engine Performance >> System >> DME System >> Testing >> DME Control
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DME Control

  1. Reconnect the fuel pressure regulator vacuum hose. Disconnect the oxygen sensor. Connect the oxygen sensor harness connector terminal to ground.
  2. Check if the CO% level increases. If not, check wire from CU connector terminal 24 to oxygen sensor plug. If no problem is found, replace the oxygen sensor.
Fig 1: Diagram of 944 DME System Distributor Align distributor cap with its locking boss facing up.
G42096