LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Porsche >> 1985 >> 944 Automatic >> Repair and Diagnosis >> Engine Performance >> System >> DME System >> Testing >> Reference Mark Sensor Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reference Mark Sensor Check

NOTE: This is an alternate test when an oscilloscope is not available.
  1. Using same LED tester as used for speed sensor, connect positive lead to CU harness connector terminal 25 and negative lead to terminal 26.
  2. Operate starter, but do not start engine. If sensor is sending a signal, LED should flicker dimly.