LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Porsche >> 1987 >> 928 Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - BOSCH LH >> Testing >> Test 21 - Oxygen Sensor & LH Fuel Control Unit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test 21 - Oxygen Sensor & LH Fuel Control Unit

  1. To check oxygen sensor, warm up engine to operating temperature. Check idle speed. Disconnect oxygen sensor plug. Connect voltmeter to ground and to the sensor wire (female plug). Reading should be .1-1.0 volts. If not, replace oxygen sensor.
  2. To check LH fuel control unit, connect CO tester to one of the 2 test pipes in engine compartment. Warm up engine to operating temperature and check idle speed. Disconnect oxygen sensor plug. Recheck CO level. Connect oxygen sensor Green wire on plug to ground. If CO does not increase, check wire from LH fuel control unit terminal No. 20 to oxygen sensor. If wire is okay, replace LH fuel control unit.
scientia non olet · About LEMON Manuals